IS Code Books: Building Construction Practices, including Painting, Varnishing and Allied Finishing

274Code of practice for the construction of timber floorsIS 3670:1989
275Code of practice for external facings and veneers, Part I: Stone facingIS 4101-1:1967
276Code of Practice for External Facings and Veneers, Part II: Cement Concrete FacingIS 4101-2:1967
277Code of Practice for External Cladding, Part 3: Wall Tiling and MosaicsIS 4101-3:1985
278Code of practice for reed wallingIS 4407:1967
279Code of practice for finishing wood and wood-based products with nitrocellulose and cold-catalysed materialsIS 4597:1968
280Preferred cut sizes of structural timber – SpecificationIS 4891:1988
281Glossary of terms applicable to roof coveringsIS 4920:1968
282Method of test for nail-jointed timber trusses, Part I: Destructive testIS 4924-1:1968
283Method of Test for Nail-jointed Timber Trusses, Part II: Proof TestIS 4924-2:1968
284Code of Practice for Design and Construction of Nailed Laminated Timber BeamsIS 4983:1968
285Code of Practice for Laying and Fixing of Sloped Roof Covering, Part I: SlatingIS 5119-1:1968
286Code of practice for laying hardwood parquet and wood block floorsIS 5389:1969
287Code of practice for the construction of timber ceilingsIS 5390:1984
288Methods of test for clear finishes for wooden furniture, Part 1: Resistance to dry heatIS 5807-1:1975
289Methods of test for clear finishes for wooden furniture, Part 2: Resistance to wet heatIS 5807-2:1975
290Methods of test for clear finishes for wooden furniture, Part 3: Resistance to marking by oils and fatsIS 5807-3:1971
291Methods of test for clear finishes for wooden furniture, Part 4: Resistance to marking by liquidsIS 5807-4:1975
292Methods of test for clear finishes for wooden furniture, Part 5: Test for low-angle glareIS 5807-5:1975
293Methods of Test for Clear Finishes for Wooden Furniture, Part VI: Resistance to Mechanical DamageIS 5807-6:1978